Recent Commercial Posts

How To Use A Fire Extinguisher?

10/7/2022 (Permalink)

How To Use A Fire Extinguisher?

Fires are scary, especially when you're not sure what to do. Thankfully, fire extinguishers are easy-to-use and can help you put out a fire quickly and safely. Fire extinguishers work best on class A, B, or C fires. If there's a lot of smoke in the air (and it's not just from cooking), it's likely that you have a class B or C fire on your hands—both of which can be put out with water but require different amounts of it based on their source. So, before we get into how to use an extinguisher effectively during an emergency, let’s take a look at some basic information about each type of fire:

Fire extinguishers are portable devices that spray water or wet or dry chemical agents for putting out a fire.

In the event of a fire, it is important to know how to use a fire extinguisher. A fire extinguisher is a portable device that sprays water or wet or dry chemical agents for putting out a fire. It is always best to call 911 once you have activated your fire alarm and called for help, but in the meantime, here's how to use a typical ABC-type (A: water; B: CO2; C: dry chemical) residential extinguisher:

  • Make sure you know where your nearest extinguisher is located and how much pressure it requires before pulling the pin (this will activate an internal valve). It also helps if you can visually confirm there are no obstructions on top of the nozzle before removing it from its mounting bracket. If there's any question about which type of agent should be used on your specific type of flame or fuel source, consult with local authorities or manufacturers' instructions for guidance on what types are suitable for different situations.
  • Squeeze firmly around the handle until you hear an audible hiss from inside—this indicates that pressurized gas has been released into its chamber ready for use.

They work best on class A, B, or C fires.

  • Class A fires are fires that involve combustible materials, such as wood, paper, or cloth. These are the most common type of fire and can be put out with a regular bucket of water—which you should always have near your emergency kit in case of an electrical fire!
  • Class B fires are fires that involve flammable liquids, such as gasoline or oil. The best way to put out this kind of fire is with sand or dirt from outside because it will smother the flames (it’s also why you shouldn’t put water on these types of fires).
  • There is also a third class: C. This isn't really a classification at all—it just means there's no flame involved at all (like an electrical short).

Stand at least 6 feet away from the fire and pull out the pin.

You should always stand at least 6 feet away from the fire when you pull out the pin and aim it at where you think the flames are coming from. The minimum distance varies depending on what type of extinguisher you have and how big the fire is, but this is a good rule of thumb that should be followed unless there are other factors involved (like if you’re trying to put out a vehicle fire with minimal space around it). On average, though, 6 feet should be enough for any home-use extinguisher.

If there is more than one person present during an emergency like this one (and there almost always will be), make sure everyone knows what their role is and where everyone else is standing so that everyone can work together efficiently. If everybody stays within about 8 feet of each other, it shouldn't be too difficult for someone using an extinguisher to hit his target without hitting any bystanders accidentally—and ideally without hitting himself as well!

Aim low and squeeze the lever slowly.

When you're using a fire extinguisher, aim low and squeeze the lever slowly. This will give you time to assess where the fire is coming from and how best to put it out. You don't want to squirt too much foam at once or douse the flames directly; instead, aim for where your eye can see that there is still oxygen feeding the fire (the base). It's also important not to let go of your extinguisher if someone else needs it—if they're closer than six feet away from where they need to be spraying their hose of pressurized liquid, then you should probably just let them borrow yours.

Spray until the fire is completely out.

If you are not sure if the fire is out, keep spraying. If the fire is still burning and is not growing, it's okay to move away from the immediate area of danger (if you're still in a safe place). But if it seems like your extinguisher isn't working, don't waste time—call 911 immediately and get as far away from where you were as possible.


Use your fire extinguisher wisely in your Oklahoma City, OK home or business, and you’ll be prepared for any emergency.

Is Your Business Required to Have Fire Insurance?

7/28/2022 (Permalink)

Fires are one of the most common and costly disasters in Smith Village, OK. Nationally, there were around 500,000 structure fires in 2017 alone, with almost 30% of them being commercial, industrial or public use properties. Fire insurance covers most of these claims.

But is it required? Does it make good economic sense, or are the premiums too expensive to justify it? Don’t premiums keep rising?
The short answer is that you should always have fire coverage. However, it may not always be required.

What Does Fire Insurance Cover?

Virtually all commercial insurance policies will cover fire damage. It’s such a common cause of disaster that a lack of coverage would probably require a special policy. The standard coverage for fires is comprehensive, including:

  • Fire cleanup
  • Water cleanup
  • Smoke cleanup

For business insurance, most insurance companies will recommend a Preferred Vendor that has been vetted and has a proven history of quality and reasonable price. Generally, the full cost of the fire restoration will be covered if you use locally-recognized cleanup and mitigation experts. Cleanup includes repairing the water damage from fire suppression efforts.

What Isn’t Covered?

Small fires that don’t produce a lot of smoke or require water suppression may not produce enough damage to exceed your deductible. You should ask your restoration specialist if it’s going to require a claim. Some cases of arson will also not be covered if you’re involved in any way.

When Is It Required?

If you have a loan or investors, they’ll probably expect you to maintain standard commercial insurance, including fire coverage. Also, if you’re renting your commercial building, the owner is likely to require you to maintain full coverage.

Should You Have It if It Isn’t Required?

Some areas, such as very rural locations, may have such limited resources to fight a fire that insurance rates may not justify the premiums. However, rates for fire coverage in Smith Village, OK, are very reasonable. It makes sound financial sense to carry a commercial insurance policy.

If you have a business, you probably need fire insurance. It’s a pretty big gamble to go without it, and your investors will certainly require it.

Key Features of Commercial Fire Protection Coverage

5/19/2022 (Permalink)

Commercial Fire Protection Coverage Highlights

The business you own or run in Downtown Oklahoma City, OK, could be a fragile enterprise without a solid fire insurance policy. In less than 24 hours, a fire could destroy a facility or cause thousands if not millions of dollars of damage. This makes getting a strong policy a necessity. While getting a fair deal is important, the real value of insurance is what it will do for your company after a disaster. A few features are essential for excellent coverage.

Insure the Full Value of Your Property

Underinsuring company holdings and property could save you a few dollars every year on premiums, but it could cost you a lot if a major fire strikes. Even in the case of a partial loss fire, you could see a reduction in the amount the insurance company pays out for fire restoration. The insurance provider will calculate the payment of a claim based on a formula that considers the percentage of underinsurance. To avoid this situation, take these steps:

  • Insure for the full value of your property
  • Use the services of a professional appraiser
  • Do not take a shortcut in determining the worth of your building

Good commercial insurance is there in case you need it. Skimping on coverages can put your company's future at risk.

Get Fire Insurance That Lets Your Company Rebuild

After a fire, your company will need to rebuild. Only an experienced fire mitigation team has the tools, training and resources needed to return your building to its pre-fire condition. Certified technicians know how to perform a successful smoke cleanup and to make sure water damage does not lead to mold growth.

Inadequate fire insurance could mean that your company will not have the money to rebuild after a fire. A strong policy is a necessity for just about every business.

How To Treat Your Commercial Property's Water Damage

4/19/2022 (Permalink)

Specialist is cleaning water damage in a business This small business had some water damage in the lobby and offices. Our team of experts at SERVPRO was called to the action!

How To Handle Water Damage In A Commercial Building

When your commercial property in Valley Brook, OK, faces water damage, a swift response is essential to minimize destruction and contamination. Permitted to linger, the moisture can lead to mold and mildew growth as well as structural rot. However, with prompt, proactive approaches, owners may reduce the number of repairs and safeguard the premises from future microbial development. The following are four things that must happen to restore the facility effectively.

1. Contain the Area

The broken pipes sprayed water throughout the facility space, possibly filling the room with bacteria and fungus. Section off the impacted zone, restricting access and minimizing exposure to other rooms. Post signs to keep others out. If someone enters, ensure proper protective gear is worn.

2. Reduce Water Exposure

When water damage lingers, the moisture permeates into porous objects, triggering mold and mildew growth. Focus on reducing dampness to slow the process and safeguard the property. Extract saturated structural materials such as drywall and flooring. Pull out wet fixtures, and throw out soaked valuables.

3. Dry Out Space

A water cleanup company has industrial dehumidifiers that pull humidity from hard-to-reach places, including the air. Several of these devices may be required to obtain the appropriate moisture levels. Expect the process to take several days, and add air movers such as a fan to control the speed.

4. Wash and Spray

Tend to the nonporous items by evaluating them closely. You may treat them with warm soapy water followed by a thorough dry. For additional assurance, apply an antimicrobial spray.
If you have special objects such as electronics, documents and photos, speak with specialists about content cleaning procedures. The experts may have the equipment to salvage those pieces.

When water damage invades your company in Valley Brook, OK, be proactive in your cleanup response. Get a clear overview of the issues, pull out the moisture and sanitize the rooms.

3 Alternatives to Sandbags

2/1/2022 (Permalink)

Sandbags Aren't The Only Option.

Your commercial building in Oklahoma City, OK, is likely built to withstand common weather conditions in your area. If a big storm hits, though, are you prepared? Many businesses rely on an old, faithful solution - the sandbag. You can protect your building faster and perhaps more effectively, however, with one of these three newer products on the market.

1. Water Dams

Did you know you can actually use water to fight storm runoff and prevent flood damage? Instead of lugging out heavy sandbags when you need extra protection for your building, you simply your water dam where you want it and fill it up with water. Water dams are easier to use than sandbags, and they can be stored easily, too. Just empty them, dry them and stack them in a closet. You can create small walls that are 20 inches high and about six feet wide, or you can surround your building with a temporary water gate that is several feet tall.

2. Miniature Levees

A levee is essentially a wall that blocks water. Traditionally, they are used by municipalities to protect entire cities. You can construct your own levee on the sides of your building that are most prone to flooding. You can build a wall of synthetic materials that blocks water, or you can go the more natural route and construct what is basically a large sandbag.

3. Synthetic Dams

Another innovation flood mitigation experts suggest for damage prevention is a synthetic dam. These flood dams can be placed where flooding usually occurs. As long as there is no water in the area, they remain compact. When water comes into contact with them, however, they absorb it and swell, creating a barrier between the rising waters and your building.

The sandbag has proven a reliable deterrent against flooding, but there are easier products on the market to use and store. You may find that one of these newer options has benefits that sandbags lack.

Fire Escape in a Commercial Setting

1/6/2022 (Permalink)

In A Commercial Setting, How Do You Get Out Of A Fire?

Because the safety of employees should always take top priority, no business owner in Oklahoma City, OK, should be without a proper fire escape plan. Read on to learn how to implement and share a strategy for safely evacuating your building and minimizing other forms of damage.

1. Exits and Space

The most important preventative measure is compliance with all existing local fire codes. Do not block any exits and have all exterior fire escapes routinely inspected for structural integrity. Leave adequate space near all sides of the building for firefighters and other emergency personnel to park their vehicles. Install and maintain multiple fire alarms and extinguishers per floor. Do not exceed the occupancy limits as outlined in your local codes, as too many people on the premises will strain any emergency escape plan and make injury or property damage more likely.

2. Implementation and Awareness

A fire escape plan is only as good as your ability to communicate it effectively with your employees. Have fire safety videos and related information as part of your routine training process. Explain an orderly evacuation procedure when all employees are present and test it with regular drills. Make sure that escape routes and building plans are labeled clearly and posted on doors and walls as required by applicable fire codes. Congregate outdoors in the vicinity of the first responders, but do not block their access to the building.

3. Emergency Training

If significant smoke is present, evacuation may require crawling along the floor and away from the escaping tendrils, which will rise near the ceiling. It will be extremely beneficial to have some segment of employees educated in first aid in case emergency personnel are delayed. For example, burns may need to be wrapped and cooled to prevent infection.

Since a commercial fire can strike at any moment, don’t wait to devise a specific fire escape plan for your place of business. This should include both a sound evacuation procedure and contact information for fire restoration professionals.

What To Expect From Fire Remediation Professionals

1/6/2022 (Permalink)

Ceiling fire damage Fire damage restoration and cleanup are no problem for SERVPRO! If you've experienced a fire in your business, call the right company!

What Can You Expect From Fire Remediation Experts?

The work completed as part of fire damage restoration services can leave your property in pre-fire condition. In some cases, much of this work can be completed while you continue to operate your business. Most of the time, fire and smoke damage remediation professionals will work quickly to allow you get back to normal operations as soon as possible.

Professionals Services Include …

What can you expect from these professionals?

• Emergency Response
• Damage Assessment
• Roof Tarping and Security
• Cleanup Services
• Repair and Restoration

These five steps are conducted efficiently to prevent further damage from occurring. The professionals may also work closely with your insurance company.

Types of Damage

In addition to flames, your property may be at risk from water, smoke, and soot damage. Hidden behind the stains and smoke damage, there may be structural damages. As professionals complete the assessment part of their work, they will take note of walls, ceilings, and floors that have been affected by the fire.

Attention for the Roof

The roof gets special attention because the work of the firefighters often involves holes for ventilation. The holes make the building vulnerable to damage from the weather and from looters or vandals. The professionals use tarps and plywood to temporarily patch the openings.

Repair and Replace

As part of the cleanup, repair, and restoration services, professionals will address stains and smells with specialized smoke cleaning procedures. Some items may be removed for cleaning, and others may be treated while on the property. Some of your furnishings and possessions should be thrown out and replaced for the continued safety of your workers and clients.

Final Consultation

Fires are often preventable. After working through the previous steps, fire restoration professionals may discuss fire safety and prevention with you. They may offer valuable insights into where to position smoke detectors to prevent future fires.

If your business has been affected by fire, knowing what to expect can help. Once Valley Brook, OK , professionals are involved, you can return your focus to keeping your business active.

3 Steps To Prepare Your Business for a Fire

11/1/2021 (Permalink)

Prepare Your Business For a Fire

Running a business in Smith Village, OK, is difficult enough, not to mention the potential issues you may run into that don't even involve your day-to-day business transactions. Thousands of businesses in the U.S., both small and large, have been destroyed by fires. Unfortunately, fire safety isn't a top priority for many business owners, so they're not prepared when an incident occurs. Not only can this threaten the lives of their employees, but it also increases the chances of the business becoming a complete loss. Here are a few ways you can create a contingency plan for your business to avoid devastation like this.

1. Invest in Fire Insurance

Most businesses don't have the finances to make a comeback after a serious fire, because losses often include the building (walls, flooring, roofing, etc.), inventory, important documents and equipment. Luckily, many business insurance plans include fire coverage. Take a close look at your policy to make sure fire coverage is included. If it's not, it may be worth paying extra for it.

2. Install Fire Alarm and Sprinkler Systems

Fire damage can be significantly decreased with proper alarm systems. Find one that will immediately notify authorities of the emergency so firefighters can put out the fire before it spreads. Automatic sprinkler systems can be a good investment to help slow down a fire until help arrives.

3. Create an Employee Evacuation Plan

Without proper planning and organization, chaos can quickly ensue during an emergency, putting many people in danger. Create an evacuation plan so your employees know where to go (and where not to go) when they hear the fire alarm. Practice it twice a year and revise it as necessary.

It's still possible to be impacted by a fire, even with a solid contingency plan in place. In these cases, look for a reputable fire restoration company in your area to help get your business back up and running as quickly as possible.

The Importance of Cleaning Smoke Odor After a Fire

9/6/2021 (Permalink)

The main concern after a commercial fire is often the building's structural damage from heat and flames. However, it's also important to consider potential secondary damage to electronics, furniture, and personal items, as well as the long-lasting odor of soot and smoke. That's why smoke cleaning may be needed after a commercial fire, even after a fairly small one. When a fire happens in Oklahoma City, OK, there is a lot to think about, so calling in the experts for cleanup is a good way to ensure that nothing is overlooked.

Special Equipment Fights Smoke Odor

After a fire, the smell of smoke in the in the walls, furniture, ceiling and equipment can be pervasive. A quick cleaning won't do the trick. Industrial equipment is needed to repair the smoke damage. Remediation specialists use the following machines to eliminate indoor odors and prevent the growth of mold and mildew:

  • Air filtration devices
  • Thermal foggers
  • Ozone machines
  • Powerful fans

A thorough smoke cleaning requires specialized knowledge. A smoke mitigation technician will make sure the job is done correctly and help to guarantee that no residual odor remains in the building. The fire damage experts can take care of all of the damage associated with an unexpected fire, whether it is a bad odor caused by excess interior moisture or water damage due to firefighting efforts.

Advance Knowledge Combats Damage

A host of calamities can visit a place of business. These situations might include a large storm that results in flooding, or a lightning strike to an electrical supply that causes a fire. Sometimes equipment fails, or the pipes burst, and raw sewage is let loose into the building. Whenever this happens it's good to know that experts are on hand in Oklahoma City, OK, to help out. The professionals can clean it up "Like it never even happened," whether it is smoke cleaning or some other service.

4 Tips To Avoid Mold in Your Restaurant

2/2/2021 (Permalink)

The Following Tips Can Help You Avoid Mold Growth In Your Restaurant

Running a restaurant is ultimately all about the customer experience. Mold growth in your kitchen is one of the last things you’d want your customers to associate with your restaurant, yet it’s a surprisingly common issue in the restaurant industry. Follow these tips to avoid a mold outbreak in your Smith Village, OK, restaurant.

1. Be Aware of Mold-Prone Areas
It’s no secret that mold needs moisture to grow and multiply, and you probably already know that moisture-prone spaces attract mold spores. A restaurant kitchen is, in general, an environment with notoriously high humidity levels. However, some areas of your kitchen are likely more attractive to mold than others. Areas to watch closely include any place that tends to be dark, warm, and prone to condensation buildup, such as behind refrigerators and coolers and under sinks.

2. Take Care of Your Ventilation System
A functioning, properly maintained ventilation system is critical to preventing mold growth in a restaurant kitchen. Your ventilation system circulates air through your kitchen and is your primary means to minimize moisture in the air and decrease humidity levels. Your ventilation system is also responsible for either introducing or preventing dust, dirt, and contaminants, which can encourage mold, from entering your kitchen. Be sure to keep up a regular maintenance schedule.

3. Monitor Humidity Levels
High humidity is a key factor in mold production, so it’s important to keep your humidity levels in check. Hygrometers, which measure humidity, are inexpensive and widely available. Aim for a reading of 30-50%.

4. Keep It Clean
Keeping your restaurant kitchen as clean as possible is the best way to prevent a mold outbreak. Clean high-traffic and high-moisture areas regularly, and don’t forget corners and hidden spaces where mold flourishes. Keep an eye out for any signs of water damage. If you suspect damage, be sure that professional restoration efforts begin as soon as possible before mold begins to colonize.
No one likes to picture mold when they think about their favorite restaurant. These tips can help you avoid mold growth in your restaurant kitchen.

How Fire Loss Is Calculated

1/19/2021 (Permalink)

After a commercial fire, you will probably hear something about your fire loss or your losses directly related to the disaster. Here are some key points that can help you understand what this is and how it is calculated.

The Purpose of It

One of the main reasons fire loss is calculated is that it helps understand how severe the disaster was. Knowing how much loss an area sees will give communities an idea of whether they need to increase the amount of fire protection or not.
A fire loss estimate is also good for identifying situations with high monetary losses. The fire department officials can look at the losses and determine which situations could have benefited from more force and which could have used less. This helps fire departments establish what equipment and practices they will need to use in different situations.

What Is in the Calculation
Here is a rough outline of what is included in the calculation:

  • Calculate the total monetary loss due to fire damage to structures
  • Add contents directly damaged by the fire, smoke, or extinguishers
  • The fire loss total will not include indirect costs, such as business interruption or fees for a remediation company

Documenting Fire Loss
To document fire loss, an official will estimate the total pre-incident value of your structure and contents. Then, they will document the monetary losses you incurred due to the fire. They will generally round numbers since this is a rough calculation. However, after the initial report is submitted, it can be edited if more accurate details are uncovered. Damage to adjacent properties will also be included in the report because it is based on the incident, not the property.
Getting an estimate for how much loss you incurred due to fire and smoke damage in Smith Village, OK, is something that the fire department will use to improve its operations. It will generally include the total direct monetary loss incurred on all properties involved.

3 Tips To Minimize Secondary Water Damage

1/14/2021 (Permalink)

Hallway with standing water and drying equipment placed in the same area Water damage in Oklahoma City, OK

Steps To Prevent or Minimize Secondary Water Damage

When water floods your building, some water damage happens right away: wet, dirty furniture, soaked carpet and padding, and wet drywall, for example. However, some types of water damage occur days, weeks, or months after the flood event, such as black mold, rotten wood, and warped walls or floors. This type of damage is called secondary damage and repairing it can be expensive and time-consuming. Luckily, it’s possible to minimize or prevent secondary water damage.

1. Start Cleanup Right Away
The water in your building will begin to evaporate into the air immediately. This evaporating water will increase your building’s humidity levels. Exposure to high humidity may cause wood to warp and paint to peel. The moist air is an excellent environment for mold and bacteria growth. Extracting the excess or standing water as soon as possible will stop it from evaporating and increasing the humidity.

2. Ensure That All Surfaces Are Properly Dried
Inadequate cleanup can result in traces of moisture remaining in your building’s walls, ducts, subfloors, or other hidden locations. This creates the perfect environment for black mold to grow and spread. Remove wet carpeting, padding, and other porous floor coverings and cut away wet drywall. All framework, insulation, and other building materials must be completely dry before repairs can begin.

3. Clean and Sanitize to Combat Mold
Mold can begin to grow within hours of the flood event. Use a chemical biocide to destroy any mold that has already formed. Note that, to prevent a future mold outbreak, it’s important to also use encapsulants and/or high-powered filtration devices to trap and remove mold spores from the air in the affected area. You may need a professional water restoration company to perform this service.
Once black mold begins to grow in your Oklahoma City, OK, building, it can be nearly impossible to remove it completely. By acting quickly and ensuring that the restoration process is carried out correctly, you can avoid most secondary damage to your building.

5 Common Commercial Sewage Issues

11/2/2020 (Permalink)

Common Plumbing Problems

As a commercial property owner, repairing and maintaining your building's plumbing and sewage systems should be very close to the top of your list of priorities. Many plumbing issues, such as a blocked sewer or broken pipe, can go unnoticed because the property owner doesn't know what to look for. Make sure to check your building in Smith Village, OK, for any of the following common plumbing problems.

1. Leaking or Overflowing Toilets
A flood caused by toilet overflow -- also known as a black water flood -- is especially problematic. The biohazards present in the flood water can cause massive amounts of structural damage, and almost always need to be addressed by flood restoration professionals.

2. Damaged Foundation
Plumbing issues that go unnoticed for long periods of time can sometimes manifest themselves in the form of structural damage. This can include cracks, bulges or other deformities in your building's foundation caused by an accumulation of flood water.

3. Broken Pipes
Some pipe breaks are obvious, while others tend to fly under the radar. A drastic increase in your monthly water bill is a good indication that you're dealing with what's known as a silent pipe break. This is a broken pipe that's hidden behind your building's walls, slowly and steadily leaking gallons of water over time.

4. Drain and Pipe Clogs
Customers tend not to respect commercial bathrooms as much as they would residential ones, which can lead to unwanted clogging. At the very least, a clogged drain can make your business look bad. In severe cases, these clogs can lead to a blocked sewer or dangerous sewage overflow.

5. Worn Down Sewer Lines
If your building is a bit older, chances are your sewer lines are still made out of cast-iron. These pipes are designed to last for about 25 years, but unfavorable conditions can certainly cause them to deteriorate prematurely.
Catching small plumbing issues and fixing them early is the key to preventing further damage to your commercial building. More severe problems, such as a blocked sewer or severe flood, need to be addressed by water restoration professionals.

3 Facts About Secondary Damage

9/23/2020 (Permalink)

black mold on wall The biggest concern that most people have after a flood is the mold growth

Secondary Damage After Water Damage

After a flood, the direct contact with the water causes the initial damage. Unfortunately, when your business floods, this will not be your only concern. Secondary damage is a complex concept. It involves any damage that occurs after the initial problem. For instance, once the water is gone, it does not mean that there will not be further trouble.

1. Mold, Bacteria, and Fungi Growth

The biggest concern that most people have after a flood is the mold growth. This is especially a concern when it comes to black mold. A strong cleanup is the best defense against mold. Make sure you do not have any water trapped or moisture left in the air. Time is of the essence when it comes to mold. Not only do you need to make sure that the main flow of water is gone but the moisture should no longer linger in the air.

2. Structural Decay

The high humidity in the air can cause structural decay to start taking place. This is why it is important for you to remove every sign of water from your business after it floods. Make sure to use cool air to dry out the building. This can help rid the air of moisture that causes decay and black mold. Structural damage is difficult to come back from. In fact, there are cases that are irreversible.

3. Wood Warping

After a flood, you may notice the wood floor warping. Additionally, you may notice the curving of a stairwell or the exterior and interior doors warping. These are symptoms of secondary damage. When this happens, you can end up with a security risk to your business.

Fortunately, black mold, structural decay, and wood warping are preventable. Professionals trained to handle commercial flood damage will know how to prevent any future problems from arising. Once you have an expert in your corner, your Oklahoma City business can return to normal.

The Benefits of Security Fencing After a Business Fire

4/20/2020 (Permalink)

The Benefits of Security Fencing After a Business Fire

The aftermath of a fire is a trying time for business owners. They have to make numerous difficult decisions as well as juggle a seemingly endless list of priorities. An experienced fire remediation team can be a big help on many of these matters. They are Here to Help and can provide assistance in the following areas:

  • Fire cleanup
  • Fire restoration
  • Insurance coordination
  • Security fence
  • Fire prevention

Technicians who are trained in fire mitigation can quickly identify fire damage and come up with proven solutions. They will work in accordance with the industry standards of the cleaning and restoration industry. These standards have been developed over time to yield the best results.

Security of the Property
Immediately after a fire, a property must be secured to prevent additional damage. A fire-ravaged building is vulnerable to weather, theft, and vandalism. A sturdy tarp over a damaged roof keeps the rain off. A security fence can be effective in keeping the curious and the criminal from the property. Depending upon the situation, a 24-hour guard may be needed to keep people away. Additional damage that occurs to a building that is not secured might not be covered by insurance. People who wander onto a dangerous property pose a serious liability issue for business owners.

Restoration of the Building
Once the building is protected with a security fence, the remediation technicians can go about their work restoring the property to its original condition. With specialized tools such as wet vacuums and air dryers they can remove water that resulted from the efforts of the fire department in Valley Brook, OK. They can also detect water damage as well as soot and smoke damage that is not readily detectable. They will pretest materials to see if they can be cleaned adequately. A restore versus replace philosophy saves money. A complete and efficient restoration enables a company to get back to business as soon as possible.

5 Ways Proper Maintenance of Your Roof Can Prevent Damage During a Storm

3/4/2020 (Permalink)

Five Ways Regular Maintenance Can Keep Your Roof Strong In a Storm

As a business owner in Valley Brook, OK, keeping up with your building’s commercial roof can feel like a major burden. You may be hesitant to spend the extra money on making roof repairs or adding a protective coating to prevent a roof leak, but it takes up less time and money than needing water damage remediation services after the fact. Here are five ways regular maintenance can keep your roof strong in a storm.

1. Avoiding Backups
If not cleaned out before a storm, your roof’s gutters and storm drains can get clogged, leading to pooling water on your roof around the foundation of your building. Have your gutters cleaned of debris at least twice a year and after heavy rain.

2. Detecting and Repairing Damages
Many major roofing problems or failure during a storm are due to preexisting damage. Make a maintenance schedule and follow it to spot tears in the membrane, a roof leak, or cracks in the flashing.

3. Securing Rooftop Equipment
It doesn’t take much for a storm to pick up the mechanical equipment on your roof. Reinforce any mounted equipment to prevent movement, including HVAC units, ventilation fans, cooling towers, communication systems, and pipework.

4. Covering Skylights
Skylights are vulnerable to cracking or shattering due to wind damage or a hailstorm. Simply covering them with wood or metal cages before a storm can help reduce major water damage to the interior of your building.

5. Preventing Leaks
Putting off a roof replacement or neglecting to reseal open areas around your roof can lead to leaks that can be so severe they cause drips inside your building. Applying a coating to your roof after any necessary repairs are made can help extend the life of your roof and safeguard it against leaks.
The best way to deal with a roof leak is to prevent it from ever happening in the first place. Keeping up with roof maintenance now means less effort and money spent in the long run.

Can Bleach Eliminate Mold?

1/9/2020 (Permalink)

Things to Eradicate Your Microbe Issue

When water is left unattended, it can create a reaction, spurring mold development. This is more serious than you may initially believe. Because mold absorbs into objects, simply wiping it down won't take care of the problem. You'll need to take additional precautions. As a business owner in Smith Village, OK, you'll want to be aware of how to handle fungus cleanup in a safe and swift manner, protecting both your assets and employees. Here are three things to keep in mind to eradicate your microbe issue.

1. Can You Use Store Bought Cleaners To Eliminate Mold?

You may think that grabbing a bottle of bleach will take care of the situation. While this formula does battle bacteria and fungi, it does not go into objects; thus, any porous materials may look fixed, but they could still contain pollutants. Therefore, don't rely on over-the-counter products because they do not go deep. Instead, you'll need the aid of a mold remediation company.

2. How Do You Get to the Root of the Problem?

During fungus cleanup, the experts will use dehumidifiers to dry out the area, preventing the water from furthering the spread. Then, they need to apply antimicrobial spray, killing anything on the surface. To really eliminate complications, the team should tear out absorbent materials. For example, in open spaces dry wall, carpet pads and baseboards pose as hazards. The spores could eat into them, hiding for long periods of time. Have these impacted regions removed. In bathrooms, make sure that grout is closely examined and that repairmen look behind tiles.

3. What Should You Avoid?

If items are not needed and faced potential exposure, it's best to remove them as you cleanup mold. Consider this with paper work and merchandise. Technology and irreplaceable items might be able to undergo special testing to eradicate the germs.
Take special care with fungus cleanup. Hire people that know what they're doing, and trash anything it harmed. Because mold isn't always on the surface, it could be posing more trouble than you think.

How Does Storm Coverage Help My Business?

12/24/2019 (Permalink)

Here are Three Points to Know About Your Policy

As a major storm approaches, business owners in Oklahoma City, OK, maybe concerned about potential destruction. After all, the system's high winds and rain pose a threat, often knocking off shingles and exposing the structure to water damage. Without storm insurance, these issues could be enough to shut down the store or force you to find financing elsewhere. Working with insurers, though, can offer a solution. Here are three points to know about your policy.

1. What Do You Pay?

First of all, you'll pay the annual premiums. Then, if something happens, deductible should be met. This varies by area, depending on increased liability and state legislation. Traditional insurance coverage has a set deductible price, requiring owners to pay a certain amount before the agency cuts a check. Because of rising costs from recent storms, some locations no longer offer this route. Instead, you may find a percentage allotted instead. Payment, in this case, is based on the total to repair the building. Review your hurricane and wind clauses because sometimes fees vary based on the reason you've requested help.

2. What Do They Repair?

Structural trouble and humidity concerns resulting from the weather are often included. For instance, if the roofing takes a beating, rainwater may leak into the ceiling. This is problematic. Not only does the top need replacing, but a water restoration company needs to attend to the location. This team of professionals can test the area for contamination, remove questionable materials and sanitize the room. Finally, they work to rebuild the loss. Storm insurance typically pays for it.

3. What Do They Exclude?

If harm happens from flooding, rising waters from rivers, streams and oceans, you may not be protected. In addition, a traditional deal does not pay for lost merchandise or time that the store is closed. These situations need separate policies.
Your organization is valuable. Storm insurance simply offers a line of defense, lending you a hand when nature gets out of control. Use it to get back on your feet. Understand your deductible and available coverage.

Prevent Secondary Water Damage to Your Business

9/25/2019 (Permalink)

Humid wooden baseboard with some mold on it Preventing secondary damage to a wooden baseboard in Smith Village, OK

Learn More About Secondary Water Damage

When a water-related disaster occurs within your Smith Village, OK, business, it is important to act fast. These disasters not only leave behind direct damage, such as broken pipes or water damage, but when not dealt with promptly and appropriately, it can lead to other aftereffects, such as black mold. Continue reading to learn more about this secondary impact.

What Is Primary Damage?

Primary damage refers to all the immediate effects of a flood, a leak or any other incident involving water. This includes wet equipment and decorations, as well as soaked walls and flooring. The water excess can compromise the stability of the building, damage your property and put your business at risk. Water removal and remediation can restore your location into a functional state.

What Is Secondary Damage?

Unfortunately, the potential issues of water damage are not always easily resolved. Even if you have cleared the water from the area, the remaining high humidity may continue to affect it. Between improper cleaning attempts and untreated or hidden areas, the evaporated water can condensate and initiate more damage. This impact manifests in multiple ways.

  • Damp and disintegrating drywall
  • Cracked, vulnerable sheetrock
  • Warped or damaged flooring
  • Presence and development of black mold
  • Foul smell

This type of destruction does not always appear immediately and can take weeks to appear, which might be too late to prevent.

How Can This Damage Be Prevented?

This secondary damage is prevented through proper cleanup and remediation, as performed by a professional water damage service. These specialists have the right tools and equipment to combat the immediate effects of the initial incident. They will ensure every object and location in the area is properly ventilated, which can greatly reduce the humidity that creates this damage.
No matter the water emergency your commercial location in Smith Village, OK is dealing with, you might need to respond promptly. A timely and proper recovery process can stop potential issues such as drywall rot and black mold from taking place.

How To Recognize Mold and What To Do Next

7/17/2019 (Permalink)

In Oklahoma City, OK there are many hazards that a small business owner or landlord has to take into account when maintaining their buildings and places of work. One of these hazards is mold and the smelly mycotoxin that always accompanies it. When allowed to go unchecked, this hazard can potentially ruin the hard work that has gone into a building or grind the business conducted within to a halt. To help prevent this, here are a few steps for renters and maintenance workers on how to recognize and fix mold growth.

3 Steps to Recognize and Fix Mold Growth.

  1. Use Your Eyes

Mold can easily be mistaken for dirt or dust if not thoroughly inspected. Depending on what fungus present, the mold could take on a variety of different shades and textures. However, mold may not have a visual presence. 

  1. Use Your Nose

Spores often incubate where small hidden leaks show up or where condensation builds as a result of a possibly broken air condition unit or something similar. When this happens, investigators can rely on their noses. Mold growth is often revealed by a variation of a musty odor. 

However, it's important to take note of any new smells. This is due to the scent of mold changing based on the spore count and where it is in its life cycle. After all, the smell is formed by the mycotoxin released by mold eating and multiplying.

  1. Fix the Problem

Once the mold has been found, whether it’s out in the open or recently excavated, it’s important to immediately focus on mold remediation. This is because mold spreads quickly, often manifesting within 48–72 hours. If it looks like the mold is relatively contained and has only covered a small surface area, it is possible to get it cleaned up. In this case, cleaners should use the proper equipment and maintain safety standards during the process. 

When maintaining a building, it’s good to be perceptive. If the mold has spread, remember that it’s important to call in a professional cleaning service. Safety should always be a priority when dealing with mold and its mycotoxin.

What to Do When a Category 1 Flood Happens

6/20/2019 (Permalink)

Office flooding in Valley Brook, OK due to a line rupture

Flooding is the last thing on a business owner’s mind as they go about work of keeping things running smoothly, increasing sales or maintaining happy and productive personnel. Where does one find the time then, or the energy to deal with a Category 1 flooding situation? Even though they may be dealing with clean water, it can do some real damage.

What is Category 1 Water Damage?

If a flood happens at work, a Category 1 event may be the best case scenario. Here are some reasons why:

  • Flooding comes from clean water sources such as a leaking supply line, overhead sprinkler system or a broken pipe
  • If caught early it does not contain the sewage, dangerous microbes, chemicals or other contaminants that exist in many other types of flooding
  • Many items can be saved with drying and cleaning

What Causes This Type of Water Damage?

The unfortunate thing with this type of flooding is that it can happen inside a wall or in a basement where it may not be noticed until some damage has already been done. With a broken pipe or supply line, sheet rock can become soaked, wooden framework saturated and floors, lower cabinets or carpeting may see some damage. In the case of a faulty overhead sprinkling system, damage to desks, electrical and computer equipment could occur.

Can Belongings Be Saved?

It is important to act quickly before the water has time to develop bacterial growth, as it may be possible to dry out carpets and other things rather than replacing them. Extracting the water as completely as possible and using large fans will help.

You will likely need to hire water damage restoration professionals in Valley Brook, OK after a clean water flood or leak to help with the clean up and drying things out. They can determine which things may be saved and to help with the restoration process. All water can cause damage to a business, with help you can feel “Like it never even happened.”

How To Stop Mold From Spreading

4/12/2019 (Permalink)

Mold spores can spread throughout a structure in several ways. An HVAC system may distribute spores or occupants may physically transmit spores from a contaminated area to parts of a building that are not yet contaminated. There are several ways to limit the spread of spores before and during mold cleanup at a building in Smith Village, OK.

Turn Off Air Conditioning or Heating

It may be possible to limit the spread of spores by shutting off the HVAC system. A building owner or manager should consider several factors:

  • Where mold is growing
  • The effects of turning off the system
  • When mold cleanup will take place

Mold may be growing within the HVAC system, or ventilation may spread spores from contaminated areas to areas that are not yet contaminated. If a mold problem has developed during the warmer months, turning off air conditioning can actually intensify the problem by increasing heat and moisture levels. An indoor environmental specialist or remediation expert can recommend effective mitigation measures.

Seal Off Openings

Mold spores can also spread through openings in a structure. These openings range in size and function:

  • Air supplies
  • Doors
  • Pipe chases
  • Vents

Building owners and managers can try to cover these openings and restrict access to contaminated areas prior to remediation. It is important to seal off the contaminated portion of a structure and limit air flow and movement between this area and the rest of a structure.

Limited or Full Containment

Mold remediation services use two types of containment for moderate or more severe contamination. Limited containment calls for a single layer of polyethylene sheeting. Full containment involves double layers of sheeting, an airlock and a decontamination chamber.

A building owner or manager can turn off an HVAC system and cover openings to limit mold contamination. Remediation specialists may rely on containment to stop mold from spreading during mold cleanup.

A Commercial Fire Next Door Can Cause Unexpected Smoke Damage Issues

1/12/2019 (Permalink)

Did you know sometimes a commercial fire in the Oklahoma City, OK, area can cause enough smoke damage to your building that you may need to file an insurance claim? Fire is an insidious agent that sends out more than just flames. As the soot and smoke are thrown into the air, they may cast a large shadow as they settle again onto and into the surrounding buildings. That is how the damage can catch you unawares.

Extreme Vapors May Damage Your Building’s Interior

Heavy smoke that lingers in the air can often carry with it toxic particles, vapors, and gases that can expand with the heat from the flames. These are some of the most common areas that may be damaged by smoke and soot in nearby buildings:

  • Ceilings
  • Walls
  • Windows

Although outside building smoke damage is often expected from a nearby fire, the broken windows, stained inside walls, and soot-covered interior are generally a surprise. In fact, smoke and soot can be carried for miles in even a gentle breeze, leading to massive areas of soot damage from even the smallest of commercial building fires.

Smoke Odors May Cause Hidden Damage to Your Property

The lingering odors after a fire are often unpleasant due to the phosgene, carbon monoxide and hydrogen cyanide that is typically produced as a result of the fire. As the gases spread, they can attach themselves to walls, furniture, carpeting, and clothing. To alleviate the hidden damage of extreme odors, call in a fire restoration specialist for a thorough building smoke cleaning. The professionals have all the tools needed to remove the offensive smoke odors.

Fire damage, whether it is visible or hidden, can be a source of angst for a commercial property owner. Don’t let the effect of a fire next door put you out of business for even one day. Look for the signs of smoke damage and take immediate action to alleviate the number of repairs your building will need.

Preparing a Business To Survive a Hurricane

10/19/2018 (Permalink)

Each year, billions of dollars in damage is caused by the high winds of hurricanes and other severe storms. Three-quarters of small businesses close within three years of experiencing hurricane damage or destruction from similar natural disasters. There are steps every business owner can take to help avoid joining these dire statistics.

Develop a Plan

Business owners in Valley Brook,OK, should assess their risk of being affected by hurricane damage and develop a plan to prepare long before facing this eventuality. Preparedness plans should address issues that will impact the business’ ability to function, which includes several concerns:

  • Maintaining current contact information for employees
  • Taking steps to protect the business’ premises, including boarding windows and doors, clearing drains, shutting off process piping that carries flammable gas or liquids, safely shutting down production lines and turning off electricity to non-critical equipment
  • Taking steps to protect the business’ equipment by anchoring heavy furniture to studs and strapping down electronics
  • Protecting important documents or maintaining duplicates off-site
  • Ensuring that fuel tanks of company vehicles and generators are filled
  • Confirming that fire protection equipment is in good working order

Put Your Business Back to Work
Preparedness plans should also address ways to minimize the length of time that the business’ operations will be interrupted. The use of a qualified recovery team will go a long way towards getting businesses running again as quickly as possible after a disaster. There are also steps you can take:

  • All damage should be documented for insurance purposes.
  • Prioritize locating and repairing potential safety hazards.
  • Make temporary repairs to damaged building walls.
  • Assess damage to equipment to determine what can be salvaged.
  • Contact information can be used to ensure that employees are safe and to keep critical staff apprised of the status of clean up.

It is incumbent upon all business owners to keep informed of a storm’s progress so that this preparedness plan can be executed efficiently in the event of a natural disaster. Taking these simple steps can help businesses survive the impact of hurricane damage.

Commercial Water Damage Mitigation Procedures

9/27/2018 (Permalink)

Air movers and dehumidifier on a water loss in a room in Oklahoma City, OK

If you have a water emergency at your Oklahoma City, OK, business such as a pipe burst cleanup or other flooding scenario, you'll need to call on the services of a professional water cleanup company to ensure that the job is done right. A restoration company will take the following steps to deal with the damage:

1. Inspect and Diagnose

Once you make the call, the water mitigation company will come to the scene to make an inspection and test the water in order to determine which specialized equipment and methods are best suited to fixing the damage.

2. Haul Out Contents

As soon as the situation is assessed, any items in the affected area, such as office equipment, electronics, furniture and documents, will be removed to a safe, dry area. Items will be sorted to determine what can and cannot be saved. Whatever can be salvaged will be cleaned, dried, deodorized and sanitized using specialized equipment and cleaning agents.

3. Extract the Water

Once everything has been taken out of the area, the water removal can begin. Depending on the cause of the water damage, whether it's a pipe burst cleanup, a supply line cleanup or removal of sewer water, different high-efficiency equipment will be used to remove the mess. Specialized sump pumps and trash pumps, in addition to truck-mounted water extractors, will be used to suck out as much moisture as possible. Any contaminated surfaces will be thoroughly sanitized.

4. Dry and Dehumidify

After the bulk of the water is extracted, steps will be taken to remove excess humidity from the air and moisture from hard-to-reach places. Heavy-duty air movers and dehumidifiers will be brought in to make sure everything is completely dry.

5. Restore

When everything has been completely dried and disinfected, structural restoration can begin. This might entail only minor repairs and painting or require the complete rebuilding of entire rooms, depending on the severity of the damage.

Whether you need a pipe burst cleanup or a building overhaul due to a major flood, a professional water mitigation company will be able to quickly take care of the problem and get your business back on track.

3 Stages of Recovery After Storm Damage

8/22/2018 (Permalink)

Flooding in Oklahoma City, OK, may feel like the end of the world, especially when your livelihood is literally under water. For about 25% of business owners, water damage resulting from a storm or other natural disaster can close the doors forever. Avoid becoming part of this unfortunate statistic by having commercial flood insurance and starting the storm restoration process as soon as possible. From the tear out of wet materials to the rebuild of your property, you can expect the three stages of recovery below.

1. Removal of Water

Do not attempt to clean up flood waters yourself. There can be multiple health and safety issues, including possible electricity coming into contact with the water and water contamination. Flood water can contain bacteria, viruses and microorganisms that can make you seriously ill. After the initial assessment of damage, storm restoration specialists typically begin by removing the excess water from your commercial building using specialized safety gear and professional grade pumps. Tear out of wet, porous, contaminated materials such as drywall then occurs.

2. Drying of Space

Once the standing water and debris are removed, dehumidifiers and industrial dryers are used to extract the remaining moisture. Specialized tools are used to detect hidden dampness to prevent water damage from spreading and causing secondary problems, such as mold.

3. Restoration of Property and Contents

After your property is cleaned and sanitized, it is safe for you to return. During this stage, the building structures are repaired including floors, walls and ceilings. The contents are professionally cleaned using a variety of techniques including dry, wet or foam cleaning. The process used is specifically tailored towards the type of materials needing restoration.

You can save your business after a storm in Oklahoma City, OK, by having the proper flood insurance and taking immediate action towards recovery. Know what to expect during the tear out and rebuild to help reduce your level of stress during the process of restoring your business to pre-flood condition. For more information, visit

How To Recover Flooded Electronics

6/21/2018 (Permalink)

When your business in Oklahoma City, OK floods, it’s not just the walls and the flooring that are affected. All the items in the area with the water damage probably need to be restored or replaced. Recovering flooded electronics is a delicate process that requires the expertise of water restoration specialists. Knowing the stages involved in the process, however, can improve your peace of mind.


The first thing the experts are going to do is inspect the items. They remove them from the water and detach them from power sources in a safe manner. After they inspect the electronic damage, they can determine the steps to take next.


To protect the items from further damage, they must be removed from danger. Some of the flooded electronics may be too big to remove from the area. The fridge in the break room, for example, must be covered and set aside but will probably remain in the building. Technicians can remove smaller items:

• Computers
• Microwaves
• Screens
• Copiers


To prevent further damage to electronics that remain in the building, specialists must extract the floodwaters and bring the humidity level down to about 25%. Industrial grade dehumidifiers and fans can assist with this process.


Before your damaged electronics can be restored, they probably need to be cleaned. Some of the items may need to be taken to an off-site facility to complete this process. The cleaning process arrests corrosion and ensures that any contamination left by the water is eliminated.


The last step of the process is drying the electronics. If they cannot be dried, or if it would be more expensive to dry them than replace them, the specialists can let you know. Do not attempt to use electronics that have not been thoroughly cleaned and dried.

Flooded electronics are part of the damage sustained when your business floods. Through quick and persistent work, however, professional restorers may be able to save your electronic equipment. Visit for more information on commercial water damage

Claims for Commercial Fire Losses

5/22/2018 (Permalink)

The process of putting out a fire in Oklahoma City, OK can cause as much or more damage to property as the fire itself. While you want to resume normal operations as quickly as possible, it’s important to assess all aspects of fire damage and thoroughly understand how the provisions of your insurance policy can help you recover. Take these steps to begin the recovery process.

Mitigate Damage

Preventing as much damage as possible after the fire can reduce the amount of your claim. Consider implementing these fire mitigation measures:

• Limit access to the property to minimize the risk of injury or further damage
• If utility services have not already been cut off, switch off electricity, gas and water
• Resist the urge to begin clean-up efforts until fire damage professionals determine how to proceed

Document the Physical Damage

Your insurance provider will need to know the extent of your physical losses. These can be documented through the use of photographs that exist in off-site storage or on a website, and through business records maintained by outside accountants or vendors. Your bank may be able to provide blueprints that can assist in determining any level of damage to the structure that will require repair. Your insurance adjuster can help you through this process.

Determine the Extent of Records Loss

If vital financial records were damaged or destroyed in the fire and its aftermath, you may consider calling in a forensic accountant. Such experts can help you recreate financial records, substantiate your losses properly and ensure that you receive full value for the insurance coverage you’ve purchased.

Estimate the Cost of Business Interruption

You may need or want to continue operations at another location while restoration is in progress. In that case, you’ll incur these expenses, at minimum:

• Property rental
• Equipment and furnishings leasing
• Utility service fees

Fire damage doesn’t have to mean the end of your business. Understanding the provisions of your insurance coverage and engaging fire restoration professionals can help you put the trauma behind you. Visit for more information on commercial fire damage. 

Thawing Frozen Pipes Before Spring Arrives

4/18/2018 (Permalink)

It happens almost every year as winter strikes. Snow may build up in driveways, nor’easters can batter and assault buildings, and power outages often hit when temperatures are below zero. However, as suddenly as it began in Oklahoma City, OK, winter ends, and spring arrives with a promise of warmth and a spring thaw. Often with spring’s arrival comes flooding and building damage due to frozen pipes. Business owners and commercial building managers can often minimize the hazard of spring thaw by being prepared and taking early action to prevent frozen water pipes from damaging property.

Thawing a Frozen Pipe

Water expands when it freezes and can put incredible pressure on a surrounding pipe. No matter how strong the metal or plastic is, the frozen water can cause the pipe to crack, tear, or break, and then ultimately cause flooding. Preventing ice-covered pipes may be the best possible solution to water damage prevention, but since it is impossible to control Mother Nature’s blistery cold spells, other measures can be taken to prevent water damage once a frozen pipe is found. Here are some ideas on how to deal with icy pipes.

• Turn a faucet on and leave it running. As the water thaws, the speed of the running water can aid in melting built-up ice in pipes.
• Run water in all faucets in the building to see if any hidden pipes may be frozen. 
• After finding a frozen area of pipe, use a hair dryer, heating pad, or space heater to warm the pipe and surrounding area. 
• If the frozen plumbing is not accessible, contact a licensed plumber.

Minimizing Water Damage

Once the plumbing has thawed, damaged pipes may bring a spring flood into the building. At the first sign of water damage due to burst pipes, contact a flood restoration team. The team’s expertise can aid them in helping to remove standing water and in sanitizing the flooded area. Preventing spring water damage and quickly addressing possible flooding can save major restoration costs, mold issues, and possibly eliminate the need for extensive repairs. For more information, visit

Be Prepared Before a Power Outage Strikes Your Business

3/19/2018 (Permalink)

Extreme weather conditions are becoming more common each year. With bad weather often comes immense blizzards, powerful wind gales, and awe-inspiring electrical storms. These storm conditions can occur suddenly, and your business may find itself in the middle of a blackout condition when electricity comes to a standstill during a workday. A power outage in OKC can be frustrating, but if your company is prepared, the outage needn’t be devastating. Here are a few tips to help you weather almost any storm.

Plan Ahead

Losing data, production time, and possible revenue can disrupt your business for more than the length of the storm. By planning ahead, you can help your company get back to business quickly with very little trouble after a power disruption. Here are a few things to include in your survival plan:

• Flashlights – To ease fear and promote safe movement.
• Portable generator and fuel – A portable source of power for emergency electricity that can be critical in heating, lighting, and preventing injuries.
• Bottled water – For customer and employee safety.
• UPS stations - To protect computer files and allow employees to save work during an outage.
• Safe room – A protected area which individuals can gather within during extreme weather.
• Disaster Help – A number to call for cleanup or restoration specialists, if needed.

Test Yourself

You may have a plan in place in case of a power outage. You may have signs all over the company with explicit instructions regarding possible outages. You may even mention details of your preparedness plan at a monthly meeting. The problem is, however, people sometimes panic when they feel a loss of control in the dark. To alleviate any possible fear or concerns, run a blackout test two or three times a year. Not only can your employees be more prepared, but this may also help insure your portable generator is working correctly.

Defeat Panic

Oklahoma City, OK may have unpredictable weather conditions at times, but your company can be prepared for the unexpected. If a power outage hits your business, keep work flowing and employees calm by planning ahead. Visit for more information on commercial storm damage.

Importance of Immediate Smoke Odor Removal

2/15/2018 (Permalink)

Following a fire, you will most likely still smell the unmistakable odor of smoke and soot. After the flames have been extinguished, you will still need to have professionals out at your property in Smith Village, Oklahoma, to handle the smoke cleaning. It is vital to not delay this procedure. You may think you can wait a few days or weeks, but the longer you wait, the harder it will be to get rid of the stench.

Locate Items That Can Be Salvaged

Part of the smoke damage remediation process is determining which items you can save and which need to be thrown away. In addition to saving the items, this part helps with identifying where the smoke odor comes from. This involves looking at various components of your commercial building, including:

• Drywall
• Framing
• Carpet
• Solid countertops
• Tile

In relation to drywall, the fire restoration experts should be able to salvage it 80 percent of the time. However, if the damage extended to behind the wall and into the insulation, then everything will need to be torn out and replaced.

Improve Air Quality

You need to be certain the employees in your commercial building have a safe environment to work in. Without prompt smoke cleaning, particles of soot may remain in the atmosphere. This significantly decreases your indoor air quality and increases the chances of someone developing health problems. Ultimately, poor indoor air quality results in respiratory issues that could result in prolonged coughing or exacerbated asthma. You can drastically decrease your liability for these health problems if you show you cleaned the building immediately after the fire.

It does not take long for the acid from soot to delve deep into various items. If you wait too long, then it may be impossible to get rid of the smell. Prompt smoke cleaning will help restore a sense of normalcy more quickly.

Visit us at for more on commercial fire. 

Mitigating Fire Damage in a Commercial Facility

12/22/2017 (Permalink)

Identify the initial actions to prevent further damage.

Our response team works closely with city fire departments to make certain the structure is safe to return to and begin work.

These services include:

  • Supply emergency power and lighting.
  • Board up entry points to prevent trespassing, theft, and vandalism. Technicians also secure large, damaged areas where trespassers might try to access the structure. These actions also prevent new damage from inclement weather.
  • Pump out water that pooled from fire suppression systems.
  • Provide dumpsters for disposing of unrecoverable property.
    For large warehouses, we bring in heavy moving equipment to clear a path through fire damaged property to complete a thorough inspection of the entire structure.

Restoration after a fire is a long process. For a business, this means a continued loss of the income needed to pay for services and insurance. SERVPRO of South Oklahoma City has decades of experience in repairing fire damage and working with fire departments and insurance companies to help you reopen your doors. Call us today at (405) 677-4000 to begin.

Don't DIY Your Water Damage

12/22/2017 (Permalink)

Mitigation Options for the Business

Mitigation can be advantageous for many reasons, but it is important that you consider working with the experts in order to have it done. If you try to handle the issue on your own, you might find that it is difficult to feel confident in the way that it is being done. This is why it is so important to hire the pros so that they can handle the water damage for you and do the cleanup that needs to be done.

Water Damage in a Flooded Business

Flooded business can be problematic for many different reasons, so you need to make sure that you hire a restoration company to handle the problem for you. Instead of trying to do this all on your own, it's imperative that you work with the experts to ensure that it's done when it is most convenient for you. Now that you know how beneficial it is for you to get the work done by an expert restoration company, it's a matter of finding one local to you and contacting them so that they can come in and get the work done at your own convenience. They will leave your office clean, dry and good as new after you have dealt with a lot of flooding due to natural or pipe issues.

Visit for more information on water damage.

Water Damage and Plumbing Problems

12/22/2017 (Permalink)

Plumbing Fixtures and Water Damage

Check whether the leakage is a result of a pipe break. After water damage, you can restore the wooden furniture if you act swiftly. Cleaning up after a severe flood is a hectic exercise that might cost a fortune. The insurance agent can help you to determine the cost of repair. However, it is vital to engage a flood restoration company if you want to get the exact figures. Before you start the cleanup process, take some photos and videos to help you whenever you want to claim the damages from your insurance company. Once you have pumped the water out, start shoveling the mud without causing scratches to the floor. Once you expose the wooden or vinyl floor, you can begin to assess the level of the damage. As you estimate the cost of home repair, be sure to salvage the resilient materials that can withstand the flood damage. The supply line break leads to the seepage of water in home plumbing systems to the floor.

Drying the surfaces

The pipe break can be hidden behind the walls, leading to the spillage of water in business floors. The water damage can cause the mold and mildew to develop. After cleaning every surface, run the air conditioner or dehumidifier to get rid of the excess humidity in the house. Watch out for the development of mold and mildew. If the mold has started to develop, you need a specialist to deal with the problem. Considering that the mold is toxic, the specialists will wear the protective gear, seal the working areas, and use the appropriate disinfectants to eliminate the problem. A pipe break can cause the leakage of water in home taps and pipes.

Visit for more information on water damage.

Quality Water Damage Restoration Services Available in Oklahoma City

7/16/2017 (Permalink)

Trained Technicians Specializing in Restoration can Get Your Business Doors Open Quickly After a Damage Event

Water penetrating the walls of your restaurant can lead to significant problems that close your doors before you have time to react. As with any water damage situation, mold can play a major role, but not if you know how to respond correctly.
Having the assistance of a qualified commercial water damage restoration company in Oklahoma City gives you access to trained professionals who understand how important your business is. With the correct equipment, tools, and experience, water causes minimal damage. Just remember, time plays a major role in the quality of the restoration you receive.
Make the most of what is available by contacting a company like SERVPRO, today. We can mitigate many of the damages you suffer and provide you with exceptional services during an emergency. With our 24-hour emergency services, you are never alone.  
You may experience plumbing issues in your kitchen, which cause extensive damage to your appliances, food stores, and serving equipment. SERVPRO’s expertly trained cleaning technicians understand how to apply specific methods that retain your appliances, such as ovens, fryers, refrigerators, and more.  
Take advantage of the services we offer; you may be surprised by the results you receive. SERVPRO pays close attention to each item affected by water damage. We move furniture from your dining area to a safe, dry location, caring not to damage each item further along the way. Our technicians dry, clean, disinfect, and repair each item individually, preventing losses that you suffer.
We have a long history of helping customers obtain the services they deserve during an emergency. Our IICRC certified technicians use a restore versus replacement attitude when performing restoration services on your property. We care about keeping your doors open so that you can provide quality services to the residents of our community.  
Visit SERVPRO of South Oklahoma City, today. We are locally owned and operated, friends within the community that come to your aid during an emergency. Obtain the cleanup and restoration services you deserve, call now. (405) 677-4000

For more information regarding Oklahoma City, click here

Convenience Store Needs Water Removal After Plumbing Fail in Oklahoma City

5/9/2017 (Permalink)

Water damage at your convenience store needs quick remediation so that your customers don't find a new place to shop. Call quickly after damage.

SERVPRO Technicians Respond Quickly After a Water Damage Disaster in Your Store

When a water main bursts inside your busy convenience store you need a speedy response. Water spreads throughout the shopping aisles, coolers, and storage areas. The amount requires professional removal, or permanent damage is possible to the structure and fixtures of the store. The staff at SERVPRO has the experience and access to the equipment that makes water abatement possible.
Water pooling within your business needs fast removal for your Oklahoma City convenience store to continue operations. You have banks of refrigerators, a coffee and beverage service area, open coolers with food and drinks all at risk from the water. You need our full-service expertise and industrial strength pumps and water extractors to set things right in a hurry.
SERVPRO staff arrive with powerful, truck-mounted equipment dedicated to speedy commercial water removal. We avoid electrical hazards during the pumping by relying upon our truck-based emergency services to supply the energy needed to run the equipment if the power is turned off in your shop for safety reasons. After the visible water exits via pumping and extractors, we set up a pattern of air movers and dehumidifiers planned with our drying target in mind.
We remove rugs and other soaked materials to ancillary sites to dry out. Then we work with you or your manager to determine what inventory within your store has too much damage to salvage. Food products and paper serving dishes must not suffer tainting from the water, or they are not fit for human consumption. Because of the debris constantly tracked into a convenience store, garbage receptacles that filled and spilled over with water, restrooms that possibly shared sewage during the flooding of water, and other issues, the possibility of severe contamination of non-sealed items for sale is real. SERVPRO has certified staff who help you make tough decisions that protect your business and your customers from harm.
If you contact us immediately, we have the chance to mitigate water damage issues quickly. Our fast reaction means your store is offline for only a short period, just long enough to remove the water and make good decisions about foodstuffs and other items to discard. An even better result emerges if you took the opportunity to create a free Emergency Ready Plan and Profile with us before a crisis occurred. Water removal is just one of the services you pre-plan by using our mobile app along with an on-site assessment by one of our inspectors. List your priorities in the event of a disaster and give SERVPRO essential information about your physical plant through this proactive practice.
SERVPRO of South Oklahoma City is ready to help your business recover from water emergency situations. Call (405) 677-4000 to develop an emergency plan and to get one of our crews on site when the water does not stop flowing.

Commercial Fire Damage in Oklahoma City

3/22/2017 (Permalink)

SERVPRO Regularly Handles BOTH Small and Large Scale Fire Damage Events

Large warehouse operations are profitable, but when a disaster strikes, they also have their specific problems. There are often multiple property owners, which means multiple insurance companies that all want to push their claims first. For the owner of the structure, this means many more headaches than what a small business owner has to deal with after a fire.

Commercial fire restoration, after an Oklahoma City business suffers a fire, is an extensive, multi-step process. SERVPRO takes the immediate steps of reducing damage effects, to include smoke and soot cleanup, water cleanup and property evaluation. We also perform an evaluation to determine the cost regarding labor, equipment, and replacement. Some of the key factors we examine are:

  • Loss of Use - The number of days the structure remains closed.
  • Loss of Value - The loss of income while the structure remains closed.
  • Effect of Smoke and Heat - Damage to the structure and property inside. Smoke and heat inspection also includes the possible effects that smoke and soot residue may have on SERVPRO and customer employees.
  • Replacement versus Restoration - This is a dual list of items. For example, the cost of replacing damaged storage racks as opposed to repairing them.

Restoration after a fire is a long process. For a business, this means a continued loss of the income needed to pay for services and insurance. SERVPRO of South Oklahoma City has decades of experience in repairing fire damage and working with fire departments and insurance companies to help you reopen your doors. Call us today at (405) 677-4000 to begin.